? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 1 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b yyww ap066g xxx macom features ? 2.0 watt saturated output power level ? variable drain voltage (6-10v) operation ? msag? process ? 5x5 mm 20 lead pqfn package description the MAAP-000066-PKG003 is a 4-stage 2.0 w power amplifier with on-chip bias networks in a 20 lead pqfn package, allowing easy assembly. this product is fully matched to 50 ohms on both the input and output. it can be used as a power amplifier stage or as a driver stage in high power applications. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com?s gaas multifunction self-aligned gate (msag ? ) process. the 5 mm pqfn package has a lead-free lead finish that is rohs compliant and compatible with a 260 o c reflow tempera- ture. the package also features low lead inductance and an ex- cellent thermal path. the mttf is 1,000,000 hours at 170 o c. primary applications ? point-to-point radios ? point-to-multipoint radios ? satcom ? broadband wireless access parameter symbol typical units bandwidth f 2.5-5.0 ghz output power p out 33.5 dbm power added efficiency pae 30 % 1-db compression point p1db 33 dbm small signal gain g 28 db input vswr vswr 1.5:1 ? output vswr vswr 2.5:1 ? gate supply current i gg < 10 ma drain supply current i dd < 1 a output third order intercept ip3 42 dbm 3 rd order intermodulation distortion, single carrier level = 23 dbm im3 -17 dbm electrical characteristics: t c = 30c 1 , z 0 = 50 , v dd = 8v, i dq = 660 ma 2 , p in = 6dbm ordering information 1. t c = case temperature. 2. adjust v gg between ?2.6 to-1.2 to achieve indicated i dq . description die tape & reel (500) tape & reel (1000) plastic pkg sample brd part number maapgm 0066-die m aap- 000066-tr0500 m aap- 000066-tr1000 m aap- 000066-smb003
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 2 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b parameter symbol absolute maximum units input power p in 11.0 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 1.04 a junction temperature t j 170 c storage temperature t stg -55 to +150 c quiescent dc power dissipated (no rf) p diss 10.4 w characteristic symbol min typ max unit drain supply voltage v dd 6.0 8.0 10.0 v gate supply voltage v gg -2.6 -1.7 -1.2 v input power p in 6 9 dbm thermal resistance jc 12.8 c/w case temperature t b note 5 c operating instructions this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -1.7 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 8 v. 3. adjust v gg to set i dq , (approxmately @ ?1.7v). 4. set rf input. 5. power down sequence in reverse. turn gate voltage off last. power derating curve, quiescent (no rf) maximum ratings 3 3. operation beyond these limits may result in permanent damage to the part. recommended operating conditions 4 4. operation outside of these ranges may reduce product reliability. 5. case temperature = 170c ? jc * v dd * i dq 0 2 4 6 8 10 12 14 -40 -20 0 20 40 60 80 100 120 140 160 180 maximum allowable case temperature (c) peak power dissipation (watts)
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 3 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b figure 1. 1 db compression point vs. frequency and drain voltage at idq = 660ma 20 22 24 26 28 30 32 34 36 38 40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 frequency (ghz) p1db (dbm) 6v 8v 10v figure 3. saturated output power vs. frequency and drain voltage at idq = 660ma 20 22 24 26 28 30 32 34 36 38 40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 frequency (ghz) output power (dbm) 6v 8v 10v figure 4. saturated power added efficiency vs. frequency and drain voltage at idq = 660ma 0 5 10 15 20 25 30 35 40 45 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 frequency (ghz) pae (%) 6v 8v 10v figure 6. small signal gain & saturated output power, power added efficiency and drain current vs. case temperature at 4.0 ghz, vd = 8v and idq = 660ma 22 24 26 28 30 32 34 36 38 40 42 -20-10 0 102030405060708090 case temperature (oc) ssg(db), pout (dbm), pae (%) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 ids (a) ssg pout pae ids figure 5. saturated output power vs. frequency and case temperature at vd = 8v and idq = 660ma 20 22 24 26 28 30 32 34 36 38 40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 fr eque nc y (g hz) output power (dbm) -20oc 40oc 95oc figure 2. small signal gain and input & output vswr vs. frequency and drain voltage at idq = 660ma 0 4 8 12 16 20 24 28 32 36 40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 frequency (ghz) gain (db) 1 2 3 4 5 6 vswr 6v 8v 10v small signal gain out p ut vswr input vswr
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 4 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b vd = 8v vd = 10v vd = 6v figure 7. output power vs. input power and frequency at vd = 6v and idq = 660ma 18 20 22 24 26 28 30 32 34 36 38 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 input power (dbm) output power (dbm) 2.5 ghz 4.0 ghz 5.0 ghz figure 8. gain vs. output power and frequency at vd = 6v and idq = 660ma 20 22 24 26 28 30 32 34 36 38 20 22 24 26 28 30 32 34 36 output power (dbm) gain (db) 2.5 ghz 4.0 ghz 5.0 ghz figure 10. gain vs. output power and frequency at vd = 8v and idq = 660ma 20 22 24 26 28 30 32 34 36 38 20 22 24 26 28 30 32 34 36 output power (dbm) gain (db) 2.5 ghz 4.0 ghz 5.0 ghz figure 12. gain vs. output power and frequencyat vd = 10v and idq = 660ma 20 22 24 26 28 30 32 34 36 38 20 22 24 26 28 30 32 34 36 output power (dbm) gain (db) 2.5 ghz 4.0 ghz 5.0 ghz figure 9. output power vs. input power and frequency at vd = 8v and idq = 660ma 18 20 22 24 26 28 30 32 34 36 38 -6-4-202468 input power (dbm) output p ower (dbm) 2.5 ghz 4.0 ghz 5.0 ghz figure 11. output power vs. input power and frequency at vd = 10v and idq = 660ma 18 20 22 24 26 28 30 32 34 36 38 -6 -4 -2 0 2 4 6 8 10 input power (dbm) output p ower (dbm) 2.5 ghz 4.0 ghz 5.0 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 5 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b vd = 8v vd = 10v vd = 6v figure 13. power added efficiency vs. input power and frequency at vd = 6v and idq = 660ma 0 5 10 15 20 25 30 35 40 45 -6 -4 -2 0 2 4 6 input power (dbm) pae (%) 2.5 ghz 4.0 ghz 5.0 ghz figure 15. power added efficiency vs. input power and frequency at vd = 8v and idq = 660ma 0 5 10 15 20 25 30 35 40 45 -6-4-202468 input power (dbm) pae (%) 2.5 ghz 4.0 ghz 5.0 ghz figure 17. power added efficiency vs. input power and frequency at vd = 10v and idq = 660ma 0 5 10 15 20 25 30 35 40 45 -6 -4 -2 0 2 4 6 8 10 input power (dbm) pae (%) 2.5 ghz 4.0 ghz 5.0 ghz figure 14. drain current vs. input power and frequency at vd = 6v and idq = 660ma 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 -6-4-20246 input power (dbm) ids (a) 2.5 ghz 4.0 ghz 5.0 ghz figure 16. drain current vs. input power and frequency at vd = 8v and idq = 660ma 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 -6-4-202468 input power (dbm) ids (a) 2.5 ghz 4.0 ghz 5.0 ghz figure 18. drain current vs. input power and frequency at vd = 10v and idq = 660ma 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 -6 -4 -2 0 2 4 6 8 10 input power (dbm) ids (a) 2.5 ghz 4.0 ghz 5.0 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 6 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b vd = 8v vd = 10v vd = 6v figure 20. third order intermod vs. output power and frequency at vd = 6v and idq =660ma 0 10 20 30 40 50 60 70 80 90 100 8 1012141618202224262830 fundamental output power - single carrier (dbm) im3 (dbc) 2.5 ghz 4.5 ghz 6.0 ghz figure 22. third order intermod vs. output power and frequency at vd = 8v and idq =660ma 0 10 20 30 40 50 60 70 80 90 100 8 1012141618202224262830 fundamental output power - single carrier (dbm) im3 (dbc) 2.5 ghz 4.5 ghz 6.0 ghz figure 24. third order intermod vs. output power and frequency at vd = 10v and idq =660ma 0 10 20 30 40 50 60 70 80 90 100 8 1012141618202224262830 fundamental output power - single carrier (dbm) im3 (dbc) 2.5 ghz 4.5 ghz 6.0 ghz figure 19. third order intercept vs. output power and frequency at vd = 6v and idq =660ma 30 32 34 36 38 40 42 44 46 48 50 8 1012141618202224262830 fundamental output power - single carrier (dbm) ip3 (dbm) 2.5 ghz 4.5 ghz 6.0 ghz figure 21. third order intercept vs. output power and frequency at vd = 8v and idq =660ma 30 32 34 36 38 40 42 44 46 48 50 8 1012141618202224262830 fundamental output power - single carrier (dbm) ip3 (dbm) 2.5 ghz 4.5 ghz 6.0 ghz figure 23. third order intercept vs. output power and frequency at vd = 10v and idq =660ma 30 32 34 36 38 40 42 44 46 48 50 8 1012141618202224262830 fundamental output power - single carrier (dbm) ip3 (dbm) 2.5 ghz 4.5 ghz 6.0 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 7 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b figure 26. third order intermod vs. case temperature and frequency at single carrier output power level = 16 dbm, vd = 8v and idq =660ma 10 15 20 25 30 35 40 45 50 55 60 -20-100 102030405060708090 case temperature (oc) im3 (dbc) 2.5 ghz 4.5 ghz 6.0 ghz figure 25. third order intercept vs. case temperature and frequency at single carrier output power level = 16 dbm, vd = 8v and idq =660ma 30 32 34 36 38 40 42 44 46 48 50 -20-100 102030405060708090 case temperature (oc) ip3 (dbm) 2.5 ghz 4.5 ghz 6.0 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 8 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b o o ap066g figure 28. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. figure 27. 5x5 mm 20-lead pqfn. refer to m/a-com application note surface mounting instructi ons for pqfn packages #s2083 * for assembly guidelines. additional precaution: all parts must receive a bake-out of 125oc for 24 hours prior to any solder reflow operation. *application notes can be found by going to the site search page of m/a-com?s web page (http://www.macom.com/search/search.jsp) and searching for the required application note. 0.1 f v dd 100 pf* ( *as close to the package as possible ) yyww ap066g xxx macom 0.1 f v gg 100pf*
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 9 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 2w 2.5?5.0 ghz m/a-com products rohs compliant MAAP-000066-PKG003 part status: preliminary rev: b figure 29. demonstration board pn maap-000066-smb003 (available upon request). yyww ap066g xxxx mac om vgg gnd (twisted pair) vdd gnd (twisted pair)
|
